TAN ENG KIT 35

Automotive Grade Polymer Electrolytic High Humidity & Temperature T591, T597, T598 & T599 AEC-Q200 Compliant Sample Kit Contents KEMET Part Number T591V227M2R5ATE009 T598D477M2R5ATE009 T598D337M006ATE025 T599D157M006ATE025 T598B476M010ATE070 T598D107M016ATE050 T598B475M035ATE200 T598D336M035ATE065 T599X336M035ATE065 T598D106M050ATE090 T597S336M006APE200 T597S476M006APE200 Case Code/ Case Size Rated Capacitance Rated Voltage KEMET/EIA µF VDC V/7343-20 D/7343-31 D/7343-31 D/7343-31 B/3528-21 D/7343-31 B/3528-21 D/7343-31 X/7343-43 D/7343-31 S/3216-12 S/3216-12 220 470 330 150 47 100 4.7 33 33 10 33 47 2.5 2.5 6.3 6.3 10 16 35 35 35 50 6.3 6.3 DC Leakage µAmps +25°C Maximum/5 Minutes 55 117.5 208 94.5 47 160 16.5 115.5 115.5 50 62.4 88.8 DF ESR Quantity % at +25°C mΩ at 25°C 120 Hz Maximum 100 kHz Maximum 10 9 10 9 10 25 10 25 8 70 10 50 8 200 10 65 10 65 10 90 10 200 10 200 10 10 10 10 10 10 10 10 10 10 10 10 Moisture Sensitivity Notice These KEMET devices are Moisture Sensitivity Level 3 (MSL3) rated per J-STD-020D. Mass production quantities are packaged in moisture resistant packaging and must be handled per J-STD-020D MSL3 requirements. Built Into Tomorrow © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com TAN ENG KIT 35 • 2/9/2021 1 Automotive Grade Polymer Electrolytic High Humidity & Temperature T591, T597, T598 & T599 AEC-Q200 Compliant Dimensions – Millimeters (Inches) Metric will govern T591 / T598 / T599 CATHODE (-) END VIEW SIDE VIEW ANODE (+) END VIEW BOTTOM VIEW A B W B Glue pad shape/design at KEMET's option H X T S S Case Size KEMET B D V X P Termination cutout at KEMET's option, either end R F L Typical Weight Component Dimensions EIA L 3.5 ±0.2 (0.138 ±0.008) 7.3 ±0.3 7343–31 (0.287 ±0.012) 7.3 ±0.3 7343-20 (0.287 ±0.012) 7.3 ±0.3 7343-43 (0.287 ±0.012) 3528–21 W H 2.8 ±0.2 (0.110 ±0.008) 4.3 ±0.3 (0.169 ±0.012) 4.3 ±0.3 (0.169 ±0.012) 4.3 ±0.3 (0.169 ±0.012) 1.9 ±0.2 (0.075 ±0.008) 2.8 ±0.3 (0.110 ±0.012) 1.9 ±0.1 (0.075 ±0.004) 4.0 ±0.3 (0.157±0.012) F ±0.1 S ±0.3 B ±0.15 ±(0.004) ±(0.012) (Ref) ±0.006 2.2 (0.087) 2.4 (0.094) 2.4 (0.094) 2.4 (0.094) 0.8 (0.031) 1.3 (0.051) 1.3 (0.051) 1.3 (0.051) 0.4 (0.016) 0.5 (0.020) N/A 0.5 (0.020) X (Ref) P (Ref) R (Ref) T A (Ref) (Minimum) 0.10 ±0.10 0.5 (0.004 ±0.004) (0.020) 0.10 ±0.10 0.9 (0.004 ±0.004) (0.035) 0.05 N/A (0.002) 0.10 ±0.10 1.7 (0.004 ±0.004) (0.067) 1.0 (0.039) 1.0 (0.039) 0.13 (0.005) 0.13 (0.005) 0.13 (0.005) 0.13 (0.005) N/A 1.0 (0.039) (mg) 1.1 (0.043) 3.8 (0.150) 3.8 (0.150) 3.8 (0.150) 95 435 274 554 Notes: Reference (Ref) – Dimensions provided for reference only. For low profile cases, no dimensions are provided for B, P, or R, because these cases do not have a bevel or a notch. These weights are provided as reference. If exact weights are needed, please contact your KEMET sales representative. T597 END VIEW BOTTOM VIEW SIDE VIEW H F L W S Case Size KEMET S Component Dimensions EIA P 2012-10 S 3216-12 Weight L W H F ±0.1 (±0.004) S ±0.2 (±0.008) 2.0 ±0.2 (0.079±0.008) 3.2 ± 0.2 (0.126 ±0.008) 1.2 ±0.2 (0.047±0.008) 1.6 ±0.2 (0.063 ±0.008) 0.9 ±0.1 (0.035±0.004) 1.1 ±0.1 (0.043 ±0.004) 0.9 (0.035) 1.2 (0.047) 0.55 (0.022) 0.8 (0.031) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com (mg) 11.3 26.2 TAN ENG KIT 35 • 2/9/2021 2